Hyundai Sonata: Accelerator Pedal Repair procedures - Fuel Delivery System - Engine Control / Fuel SystemHyundai Sonata: Accelerator Pedal Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).

3.
Remove the mounting cap (A).

4.
Remove the installation bolt (A), and then remove the accelerator pedal module.

Installation
1.
Install in the reverse order of removal.

Accelerator pedal module installation bolt :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Filler-Neck Assembly Repair procedures
    Removal 1. Turn the ignition seitch OFF and disconnect the battery negative (-) cable. 2. Open the fuel filler door and then remove the filler-neck installation screw (A). 3. Lift the veh ...

    Delivery Pipe Repair procedures
    Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure f ...

    See also:

    Specifications
    Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 70 lit. (18.5 U.S.gal., 74.0 U.S.qt., 61.6 Imp ...

    Battery. Components and Components Location
    Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket ...

    Canister Close Valve (CCV) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...