Hyundai Sonata: Air Cleaner Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Sonata: Air Cleaner Repair procedures

Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
DIsconnect the air duct (A).

4.
Remove the air duct and air cleaner assembly.

Tightening torque
Hose clamp bolt:
2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)
Air cleaner assembly bolts:
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

(1)
Disconnect the breather hose (A), RCV hose (B), booster vacuum hose (C) and air intake hose (D).
(2)
Remove the air cleaner assembly (E).

5.
Install in the reverse order of removal.
Air Cleaner Element
1.
Open the service cover (A)

2.
Replace the air cleaner element (A) with a new one.

    Air Cleaner Components and Components Location
    Components 1. Air duct2. Air intake hose3. Air cleaner body4. Air cleaner element5. Air cleaner element service cover ...

    Intake Manifold Components and Components Location
    Components 1. Intake manifold assembly2. Intake manifold gasket3. Electronic throttle body gasket4. Electronic throttle body ...

    See also:

    Clutch Pedal. Repair procedures
    Removal Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off im ...

    Master Cylinder. Components and Components Location
    Components 1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...

    Components and Components Location
    Components 1. ESC Control Module (HECU) 2. Front Wheel Speed Sensor 3. Rear Wheel Speed Sensor 4. Steering Wheel Angle Sensor 5. Yaw-late & Lateral G SEnsor ...