Hyundai Sonata: Audio Unit Repair procedures - Audio - Body Electrical SystemHyundai Sonata: Audio Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia upper panal.
(Refer to Body - "Cluster Fascia Upper Panel")
3.
Remove the audio head unit (A) after loosening the screws.

4.
Remove the audio head unit after disconnecting the connectors and cable (A).

   
When the compact disc is not ejected, do not remove it forcibly.
Installation
1.
Connect the audio unit connectors and cable.
2.
Install the audio head unit.
3.
Install the cluster fascia upper panel.
4.
Connect the negative (-) battery terminal.
   
A.
Make sure the connector are connected in properly.
B.
Check the audio system.
    Audio Unit Components and Components Location
    Components Connector Pin Information NoConnector AConnector B1Rear left speaker (+)CAN High2Front left speaker (+)-3Front right speaker (+)-4Rear right speaker (+)Steering wheel remote5--6-USB D ( ...

    Speakers Repair procedures
    Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector i ...

    See also:

    Schematic Diagrams
    System Block Diagram ...

    XM radio
    Using XM satellite Radio Your vehicle is equipped with a 3 month complimentary period of XM Satellite Radio. XM provides access to over 130 channels of music, information, and entertainment progr ...

    Components and Components Location
    Component Location 1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. BCM (Body Control Module) ...