Hyundai Sonata: Battery Sensor Repair procedures - Charging System - Engine Electrical SystemHyundai Sonata: Battery Sensor Repair procedures

Removal
1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolts (B).

Installation
1.
Install in the reverse order of removal.

Battery sensor cable installation bolt:
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1 lb-ft)
Battery (-) terminal tightening nut:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

    Battery Sensor Description and Operation
    Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power s ...

    See also:

    Steering Gear box Repair procedures
    Removal 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap(A) when removing the it. ...

    Hazard Lamp Switch. Repair procedures
    Inspection Hazard Lamp Switch 1. Remove the center fascia panel. (Refer to the BD group - "Crash pad") 2. Disconnect the ...

    Sunglass holder
    To open the sunglass holder, press the cover and the holder will slowly open. Place your sunglasses in the compartment door with the lenses facing out. Push to close. WARNING Do not keep ...