Hyundai Sonata: Blind Spot Detection Switch Repair procedures - Blind Spot Detection system - Body Electrical SystemHyundai Sonata: Blind Spot Detection Switch Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Rmove the blind spot detection (BSD) switch (A) after disengaging the mounting clip.

Installation
1.
Install the crash pad side switch assembly after connecting the connector.
2.
Install the crash pad lower panel.
Inspection
1.
Disconnect the BSD switch connector (A).

2.
Operate the BSD switch, then check for continuity between terminals of BSD switch connector.

    Blind Spot Detection Indicator Components and Components Location
    Components 1. AVM Camera2. Ambient temperature sensor3. Puddle lamp ...

    See also:

    To turn cruise control off, do one of the following
    Push the cruise ON/OFF button (the CRUISE indicator light in the instrument cluster will go off). Turn the ignition off. Both of these actions cancel cruise control operation. If you wa ...

    Cruise Control Switch Schematic Diagrams
    Circuit Diagram ...

    Fuel Fill Door. Repair procedures
    Replacement 1. Remove the fuel fill door cap (A). 2. After loosening the mounting screws, then remove the fuel fill door catch pac ...