Hyundai Sonata: Blower Unit Components and Components Location - Blower - Heating, Ventilation and Air ConditioningHyundai Sonata: Blower Unit Components and Components Location

Component Location

1. Blower unit assembly

Components

1. Intake actuator
2. Intake case [LH]
3. Intake door assembly
4. Air filter
5. Filter cover assembly
6. Intake inlet seal
7. Intake case [RH]
8. Intake outlet seal
9. Blower upper cover
10. Blower unit pad
11. Blower lower case
12. Resistor
13. Power transistor assembly
14. Blower pan
15. Blower motor assembly
16. Blower motor harness sub assembly

    Blower
    ...

    Blower Unit Repair procedures
    Replacement     When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent ...

    See also:

    Power Door Mirror Actuator Repair procedures
    Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door quadrant inner cover (A). 3. Disconnect the power door mirror connector from the harness. 4. Apply ...

    Front Oil Seal Repair procedures
    Removal and Installation 1. Crankshaft damper pulley. (Refer to Timing System - "Damper Pulley") 2. Remove the front oil seal.     Using the SST (09455-21200), reassemble t ...

    Components and Components Location
    Component Location 1. Fuel filler door open switch2. Fuel filler door release actuator ...