Hyundai Sonata: BLUE LINK Unit Repair procedures - BLUE LINK - Body Electrical SystemHyundai Sonata: BLUE LINK Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly")
3.
Remove the knee airbag (KAB) module.
(Refer to Restraint - "Knee Airbag (KAB) Module")
4.
Remove the driver's side shower duct.
(Refer to Heating, Ventilation and Air Conditioning - "Temperature Control Actuator")
5.
Remove the blue link unit after disconnect the connector and loosening the nut and screws.

Installation
1.
Install the blue link unit.
2.
install the main crash pad.
3.
Connect the negative (-) battery terminal.
Inspection
Diagnosis with GDS
1.
The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS) The diagnostic system (GDS) provides the following information.
(1)
Self diagnosis : Checking the failure code (DTC) and display
(2)
Current data : Checking the system input/output data state
(3)
Actuator test : Checking the system operation condition
(4)
Additional function : Other controlling such as he system option and zero point adjustment
2.
Select the "Car Model" and the system to be checked in order to check the vehicle with the tester.
3.
Select the "Telematics Unit (TMU)" to check the telematics unit.
4.
Select the "Current Data" menu to search the current state of the input/output data.
The input/output data for the sensors corresponding to the TMU can be checked.

5.
To check the DTC of the TMU, select "Diagnostic trouble codes".
    BLUE LINK Unit Components and Components Location
    Component (Only for the audio TMU System)     The Blue Link unit for AVN is equipped in the AVN head unit. ...

    See also:

    Ambient Temperature Sensor Description and Operation
    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower te ...

    Solenoid valve. Repair procedures
    Removal 1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

    Care of disc
    If the temperature inside the car is too high, open the car windows to ventilate before using the system. It is illegal to copy and use MP3/WMA files without permission. Use CDs that are cr ...