Hyundai Sonata: Brake Pedal Repair procedures - Brake System - Brake SystemHyundai Sonata: Brake Pedal Repair procedures

Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Remove the knee air bag.
(Refer to Restraint - "Knee Airbag(KAB) Module")
4.
Disconnect the stop lamp switch connector (A), and than remove stop lamp switch.

5.
Pull down steering column shaft after removing bolts and nuts
(Refer to - "Steering System - "Steering Column and Shaft")
6.
Remove the brake pedal member mounting nut (A).

Tightening torque :
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

7.
Remove the snap pin (A) and clevis pin (B).

8.
Remove the brake pedal member assembly mounting nuts and then remove the brake pedal assembly.

Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Inspection
1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal return spring for damage.
Installation
1.
Installation is the reverse of removal.
   
Before installing the pin, apply the grease to the clevis pin.
Use a new snap pin whenever installing.
2.
Adjust the brake pedal height and free play.
3.
Check the brake pedal operation.
    Brake Pedal Components and Components Location
    Components 1. Brake member assembly2. Stop lamp switch3. Bolt4. Return spring5. Brake pedal assembly6. Locking plate ...

    Front Disc Brake Components and Components Location
    Components 1. Guide rod bolt2. Bleed screw3. Caliper bracket 4. Caliper body5. Inner pad shim6. Brake pad7. Pad retainer ...

    See also:

    Intake Air Temperature Sensor (IATS). Description and Operation
    Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction o ...

    Steering Angle Sensor Specifications
    Specification Service Standard DescriptionSpecificationOperating voltage8 ~ 16VOperating temperature-40 ~ 85°C(-40 ~ 185°F)Current consumptionMax.150mAMeasuring rangeAngle-780 ~ 779.9°Angula ...

    Electric Parking Brake (EPB) Description and Operation
    Description The EPB is an electronic parking brake. The EPB is different from existing parking systems which operated with the brake pedal or the lever type. The EPB system sends the signal t ...