Hyundai Sonata: Console Armrest Repair procedures - Floor Console - Body (Interior and Exterior)Hyundai Sonata: Console Armrest Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
2.
After loosen the mounting screws, remove the console armrest (A).

3.
Install in the reverse order of removal.
   
Make sure the connector is connected properly.
Replace any damage clips.
    Console Armrest Components and Components Location
    Component Location 1. Front console armrest ...

    Rear Console Cover Components and Components Location
    Component Location 1. Rear console cover ...

    See also:

    Body Side Moldings. Repair procedures
    Replacement Roof Molding Replacement • When prying with a flat-tip screwdriver, wrap itwith pro ...

    Aux, USB and iPod® port
    If your vehicle has an aux and/or USB(universal serial bus) port or iPod port, you can use an aux port to connect audio devices and a USB port to plug in a USB, and an iPod port to plug in an ...

    Yaw-rate and Lateral G Sensor. Description and Operation
    Description When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate electroniclly by the vibration change of plate fork inside the yaw rate senso ...