Hyundai Sonata: Cowl Side Trim Repair procedures - Interior Trim - Body (Interior and Exterior)Hyundai Sonata: Cowl Side Trim Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
2.
Remove the hood latch release handle.
(Refer to Hood - "Hood Latch Release Handle")
3.
Slighty remove the front door body side weatherstrip.
4.
Using a screwdriver or remover, remove the cowl side trim (A).

5.
Install in the reverse order of removal.
   
Replace any damage clips.
    Cowl Side Trim Components and Components Location
    Component Location 1. Cowl side trim ...

    Front Pillar Trim Components and Components Location
    Component Location 1. Front pillar trim ...

    See also:

    Specifications
    Specifications ItemSpecificationMaster cylinderTypeSingleI.D. mm(in)NON EPB ?22.22mmEPB?23.81mmPiston stroke mm(in)45±1mm(1.77±0.039in)Fluid level sensorProvidedBrake booster?Type11" Singl ...

    Front Door Latch Repair procedures
    Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. To remove the front door outside handle base connector (A), widen both sides of the lock pins in ...

    Front Body. Body Repair
    Front Body A Front Body B Front Body C ...