Hyundai Sonata: Crash Pad Lower Panel Repair procedures - Crash Pad - Body (Interior and Exterior)Hyundai Sonata: Crash Pad Lower Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim")
2.
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

3.
After loosening the mounting screws, then remove the crash pad lower panel (A).

4.
Disconnect the diagnosis connector (A) and various connectors (B).

5.
Install in the reverse order of removal.
   
Make sure the connector is connected properly.
Replace any damage clips.
    Crash Pad Lower Panel Components and Components Location
    Component Location 1. Crash pad lower panel ...

    See also:

    Specifications
    Specifications Fuel Delivery System ItemsSpecificationFuel TankCapacity70 lit. (18.5 U.S.gal., 74.0 U.S.qt., 61.6 Imp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line480 ~ 500 ...

    Operation in foreign countries
    If you are going to drive your vehicle in another country, be sure to: Observe all regulations regarding registration and insurance. Determine that acceptable fuel is available. ...

    Fuel Filler Door Open Switch Repair procedures
    Inspection 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the fuel filler door open switch (A).     Take care not to scratch the ...