Hyundai Sonata: Description and Operation - Auto Lighting Control System - Body Electrical SystemHyundai Sonata: Description and Operation

Description
It's a system that uses illumination sensor to automatically turn ON the tail lamp and head lamp based on the change in surrounding environment's illumination condition. It activates when the vehicle enters/exits tunnel, or when the illumination condition in surrounding environment changes due to rain, snow, or fog. Precautions corresponding to the use of this system are as follows.
1.
Do not add another device on top of this device.
2.
Be sure to switch to manual during poor visibility climate, such as fog, heavy rain, or cloudy weather.
3.
Illumination intensity in an actual vehicle is not always constant, and lamp ON/OFF time may very depending on the climate, season, and surrounding environment.
4.
Use this system only during sunrise and sunset period, and manually control lamp ON/OFF for general conditions.
5.
Error may occur if light block coating that may change interior illumination is applied.
    Schematic Diagrams
    Circuit Diagram ...

    Auto Light Sensor Repair procedures
    Inspection Check if the auto light control operates like a timing chart shown below. Tail lamp output and head lamp (Low) output is controlled based on the auto light sensor's input (illuminati ...

    See also:

    Adding equipment to or modifying your air bag-equipped vehicle
    If you modify your vehicle by changing your vehicle's frame, bumper system, front end or side sheet metal or ride height, this may affect the operation of your vehicle's air bag system. ...

    Advanced Smart Cruise Control (ASCC) Switch Components and Components Location
    Components 1. SET - switch2. RES + switch3. ASCC switch4. CANCEL switch5. CRUISE switch ...

    Interior Trim. Repair procedures
    Replacement Front Pillar Trim Replacement • Put on gloves to protect your hands. ...