Hyundai Sonata: Electric WGT Control Actuator Specifications - Engine Control System - Engine Control / Fuel SystemHyundai Sonata: Electric WGT Control Actuator Specifications

Specification
[EWGA Position Sensor]
Position
Output Voltage[V]
Operating Angle[°]
Range of Rod [mm], reference
Mechanical Close end stop Position (MCP)
4.8
0
0
Electrical Close end stop Position (ECP)
4.2
12
1.8
Electrical Open end stop Position (EOP)
1
79
16
Mechanical Open end stop Position (MOP)
0.5
90
18

[EWGA DC Motor]
Item
Specification
Coil Resistance (?)
1.44 ~ 1.96 [21°C(69.8°F)]

    Electric WGT Control Actuator Description and Operation
    Desrcription The Electric WGT Control Actuator is installed on the turbocharger.It operates the vain in the Waste Gate Turbocharger (WGT) and regulates the compressed air amount by the ECM's PW ...

    Electric WGT Control Actuator Schematic Diagrams
    Signal Waveform Circuit Diagram ...

    See also:

    Care of seat belts
    Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. WAR ...

    Drive Belt Tensioner Repair procedures
    Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the alternator. (Refer to Engine Electrical System - "Alternator") 3. Remove the alte ...

    Boost Pressure Sensor (BPS) Description and Operation
    Description The Boost Pressure Sensor (BPS) is installed on the intercooler assembly and measures the pressure of the compressed air in turbocharger. ...