Hyundai Sonata: EPB Switch Repair procedures - Parking Brake System - Brake SystemHyundai Sonata: EPB Switch Repair procedures

Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.
(Refer to Body - “Floor console assembly")
3.
Remove the EPB switch after loosening the screws.

4.
Install in the reverse order of removal.
    Electric Parking Brake (EPB) Repair procedures
    EPB Release 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Connect the GDS to the data link connector located underneath the dash panel. 3. Select and operat ...

    See also:

    Front Strut Assembly. Components and Components Location
    Components 1. Insulator cap 2. Insulator assembly 3. Strut bearing 4. Spring upper seat 5. Spring upper pad 6. Coil spring 7. Spring lower pad 8. Dust ...

    Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    Special Service Tools
    Special Service Tools Tool (Number and Name) Illustration Use 09568-34000 Crossmember support Supporting of the cro ...