Hyundai Sonata: External Damper Flywheel Repair procedures - Cylinder Block - Engine Mechanical SystemHyundai Sonata: External Damper Flywheel Repair procedures

Removal and installation
1.
Remove the dual clutch transmission.
(Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly")
2.
Remove the external damper (A).

Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.
    External Damper Flywheel Components and Components Location
    Components 1. External damper flywheel ...

    Water Jacket Seperator Components and Components Location
    Components 1. Water Jacket Seperator ...

    See also:

    ETC (Electronic Throttle Control) System. Specifications
    Specification [Throttle Position Sensor (TPS)] Throttle Angle(В°) Output Voltage(V) TPS1 TPS2 0 0.0 5.0 ...

    Illuminated engine start/stop button
    Whenever the front door is opened, the engine start/stop button will illuminate for your convenience. The light will go off after about 30 seconds when the door is closed. ...

    Compass Mirror. Repair procedures
    Calibration Procedure If the compass has been calibrated or set to variance zone number incorrectly, or you are driving in specific places (tunnel, parking lot in building, underground parki ...