Hyundai Sonata: Fender Garnish Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Sonata: Fender Garnish Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Using a screwdriver, remove the fender garnish (A).
   
Relplace the fender garnish to a new one.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Rear Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    Front Mud Guard Repair procedures
    Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

    See also:

    ETC (Electronic Throttle Control) System Description and Operation
    Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cab ...

    Intake Air Temperature Sensor (IATS) Description and Operation
    Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of t ...

    Injector Schematic Diagrams
    Circuit Diagram ...