Hyundai Sonata: Front Seat Assembly Repair procedures - Front Seat - Body (Interior and Exterior)Hyundai Sonata: Front Seat Assembly Repair procedures

Replacement
   
When folding the seatback forward in state that headrest and seat is upper and seat is moved forward, be careful not to touch the components such as sunvisor.
1.
Remove the front anchor seat belt.
(Refer to Restraint - "EFD (Emergency Fastening Device) System")
2.
After loosening the mounting bolts, remove the front seat assembly.

Tightening torque :
49.0 ~ 63.7 N.m (5..0 ~ 6.5 kgf.m, 36.2~ 47.0 lb-ft)

[Front]

[Rear]

3.
Disconnect the main connector (A), side airbag connector (B), front seat belt buckle connector (C).
[Driver's]

[Passenger's]

4.
Install in the reverse order of removal.
   
SEAT MOUNTING BOLT INSTALLATION PROCEDURE
Set the seat into the most rearward position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely.
Set the seat into the most rearward position. Check the front mounting bolt completely.
Check that the seat operates to and fro smoothy and the locking portion locks properly.
    Front Seat Assembly Components and Components Location
    Component Location 1. Front seat assembly ...

    Front Seat Outer Shield Cover Components and Components Location
    Component Location 1. Front seat outer shield cover ...

    See also:

    Refrigerant Line Components and Components Location
    Components Location 1. Refrigerant Line2. Comperssor ...

    Camshaft Position Sensor (CMPS) Description and Operation
    Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the pisto ...

    Cylinder Block Components and Components Location
    Components 1.  Cylinder block2.  Ladder frame3.  Crank shaft4.  Crank shaft upper bearing5.  Crank shaft lower bearing6.  Thrust bearing7.  Main bearing cap8.&n ...