Hyundai Sonata: Front Seat Belt Retractor Repair procedures - Front Seat Belt - Body (Interior and Exterior)Hyundai Sonata: Front Seat Belt Retractor Repair procedures

Replacement
   
When installing the belt, make sure not to damage the retractor.
1.
Remove the center pillar lower trim.
(Refer to Interior Trim - "Center Pillar Trim")
2.
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
3.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
After disconnecting the connectors (A) by pushing the lock pin, loosen the mounting bolts, and then, remove the front seat belt retrator (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

5.
Install in the reverse order of removal.
   
Make sure the connector is plugged in properly.
Replace any damaged clips.
    Front Seat Belt Retractor Components and Components Location
    Component Location 1. Front seat belt retractor ...

    Height Adjust Components and Components Location
    Component Location 1. Height adjust ...

    See also:

    Trunk lid control switch
    The trunk lid control switch is used to prevent unauthorized access to the trunk. When the trunk lid control switch is UNLOCK position (), the trunk can be unlocked with the trunk lid release ...

    Trunk Lid Back Panel Components and Components Location
    Component Location 1. Trunk lid back panel ...

    Air intake control
    Type A Type B Adjusting the driver and passenger side temperature individually 1. Press the DUAL button to operate the driver and passenger side temperature individually. Turning the righ ...