Hyundai Sonata: Front Seat Frame Assembly Repair procedures - Front Seat - Body (Interior and Exterior)Hyundai Sonata: Front Seat Frame Assembly Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front seat back cover.
(Refer to Front Seat - "Front Seat Back Cover")
2.
Remove the front seat cushion cover.
(Refer to Front Seat - "Front Seat Cushion Cover")
3.
Remove the side airbag (SAB) module.
(Refer to Airbag Module - "Side Airbag (SAB) Module")
4.
Remove the lumbar support assembly.
(Refer to Body Electrical System - "Lumbar Support Unit")
5.
After loosening the mounting bolts, then disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).

6.
Install in the reverse order of removal.
   
Remove the side air bag for replacing side air bag installation seat.
(Refer to Restraint - "Side Airbag (SAB) Module")
Before service, be fully aware of precautions and service procedure relevant to air bag.
(Refer to Restraint - "Side Airbag (SAB) Module")
    Front Seat Frame Assembly Components and Components Location
    Component Location 1. Front seat back frame assembly2. Front seat cushion frame assembly ...

    Rear Seat
    ...

    See also:

    Instrument Cluster. Schematic Diagrams
    Circuit Diagram Input/Output Specification ...

    License plate light bulb replacement
    1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Rei ...

    Repair procedures
    Removal • Use fender covers to avoid damaging painted surfaces. ...