Hyundai Sonata: Fuel Filler Cap Description and Operation - Evaporative Emission Control System - Emission Control SystemHyundai Sonata: Fuel Filler Cap Description and Operation

Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

1. Cover
2. Torsion spring
3. Retainer
4. Gasket seal
5. Spring
6. Plate seal
7. Vacuum valve
8. Spring

    Canister Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the fuel tank. (Refer to Engine Control / Fuel System - " Fuel Tank") 3. Disconnect th ...

    Fuel Tank Air Filter Repair procedures
    Replacement 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Lift the vehicle. 3. Remove the rear-left wheel & tire and house cover. 4. Disconnec ...

    See also:

    Body Repair
    Interior A Interior B Interior C Interior D ...

    Special Service Tools
    Special Service Tools Tool(Number and Name)IllustrationUse09200-3N000Engine support fixture(Beam)Removal and installation of the transaxle.Use this beam (SST No. : 09200-3N000) with the supporter ...

    Schematic Diagrams
    Circuit Diagram - ESC (1) Circuit Diagram - ESC (2) Circuit Diagram - ESC (3) ESC HECU Connector input/output Connector Terminal Specifications ...