Hyundai Sonata: Fuel Filler Door Release Actuator Repair procedures - Fuel Filler Door - Body Electrical SystemHyundai Sonata: Fuel Filler Door Release Actuator Repair procedures

Inspection
1.
Remove the left luggage side trim.
(Refer to Body - "Trunk Trim")
2.
Loosen the fuel filler actuator mounting bolts (2EA).

3.
Remove the fuel filler door release actuator (B) after disconnecting the fuel filler door release actuator connector (A).

4.
Check for continuity between terminal No. 1 and No. 2. If there is no continuity, replace the fuel filler door release actuator (A).

    Components and Components Location
    Component Location 1. Fuel filler door open switch2. Fuel filler door release actuator ...

    See also:

    Knock Sensor (KS). Description and Operation
    Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knoc ...

    Accelerator Position Sensor (APS) Repair procedures
    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer t ...

    Front Door Trim Components and Components Location
    Component Location 1. Front door trim ...