Hyundai Sonata: Fuel Pressure Control Valve Repair procedures - Engine Control System - Engine Control / Fuel SystemHyundai Sonata: Fuel Pressure Control Valve Repair procedures

Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to “Specification”

    Canister Close Valve (CCV) Description and Operation
    Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage dete ...

    See also:

    Drive Belt Components and Components Location
    Components 1. Drive belt ...

    Troubleshooting
    Troubleshooting Symptom Suspected area Repairment Pressing power switch does not turn on system Radio receiver power source circuit ...

    Rear Bumper Beam Assembly Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...