Hyundai Sonata: Heated Oxygen Sensor (HO2S) Specifications - Engine Control System - Engine Control / Fuel SystemHyundai Sonata: Heated Oxygen Sensor (HO2S) Specifications

Specification
HO2S [Bank 1/Sensor 1] (Linear type)
Item
Specification
Heater Resistance (?)
2.4 ~ 4.0 [20°C(68°F)]

Item
Specification
Heater Resistance (?)
Approx. 9.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2] (Binary type)
A/F Ratio (?)
Output Voltage(V)
RICH
0.6 ~ 1.0
LEAN
0 ~ 0.4

Item
Specification
Heater Resistance (?)
Approx. 9.0 [20°C(68°F)]

    Heated Oxygen Sensor (HO2S) Description and Operation
    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...

    See also:

    Crankshaft Position Sensor (CKPS) Description and Operation
    Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine ...

    ESP OFF Switch Description and Operation
    Description 1. The ESP OFF switch is for the user to turn off the ESP system. 2. The ESP OFF lamp is on when ESP OFF switch is engaged. ...

    Battery replacement
    The transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gen ...