Hyundai Sonata: Heated Steering wheel Description and Operation - Steering wheel - Steering SystemHyundai Sonata: Heated Steering wheel Description and Operation

Description
Heated pads to grip the steering grip makes the fever.
1.
Heated control unit

Type
Temperature
Remarks
Leather
38°C±4°C
Apply to the entire lather surface

2.
Heated steering control : BCM(body control module) integrated management

3.
heated steering pad

Operation
The push-return switch transmits signals to the steering wheel heating module.
Pressing the switch on once repeatedly cycles the unit between the ON and OFF modes.
If the power is cut off during operation, the switch is reset to off status.
Therefore steering wheel heating module is initialized to off status.
    Repair procedures
    Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. ...

    Heated Steering wheel Schematic Diagrams
    Schematic diagram Terminal function Pin NoFunctionA2Heated steering powerA3Swtich signalA13NTC (-)C9NTC (+) ...

    See also:

    Brake Pedal. Repair procedures
    Removal 1. Remove the crash pad lower panel. (Refer to the Body group- crash pad). 2. Pull down steering column shaft after removing bolts ...

    Positive Crankcase Ventilation (PCV) Valve. Repair procedures
    Removal 1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). Inspection 1. Insert a thin ...

    Front Hub - Axle Repair procedures
    Replacement Front hub assembly 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap (A) ...