Hyundai Sonata: High Mounted Stop Lamp Repair procedures - Lighting System - Body Electrical SystemHyundai Sonata: High Mounted Stop Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear package tray trim.
(Refer to Body - "Rear Package Tray Trim")
3.
Remove the high mounted stop lamp after disengaging the mounting clip.

Installation
1.
Install the rear high mounted stop lamp.
2.
Install the package tray trim.
3.
Connect the negative (-) battery terminal.
    License Lamps Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lid panel. (Refer to Body - "Trunk Lid Trim") 3. Remove the license lamp after disengaging the license lamp mo ...

    Rear Combination Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the nuts (4EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination ...

    See also:

    Components and Components Location
    Components 1. Rear window glass2. Rear glass lower moulding ...

    Rear Coil Spring Repair procedures
    Replacement 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap (A) when removing the it ...

    General Information
    General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure ...