Hyundai Sonata: Hood Assembly Repair procedures - Hood - Body (Interior and Exterior)Hyundai Sonata: Hood Assembly Repair procedures

Replacement
   
Be careful not to damage the hood and body.
   
When removing and installing the hood, an assistant is necessary.
1.
After loosening the hood hinge (A) mounting bolts, remove the hood assembly (B).

Tightening torque :
21.6 ~ 26.5 N.m (2.2 ~ 2.7 kgf.m, 15.9 ~ 19.5 lb-ft)

2.
Install in the reverse order of removal.
   
Make sure the hood locks / unlocks and opens / closes properly.
Adjust the hood alignment.
    Hood Assembly Components and Components Location
    Component Location 1. Hood assembly ...

    Hood Lift Repair procedures
    Replacement     • When removing and installing the hood lift, an assistant is necessary. • When removing the hood lift, first remove the lower portion and then upper ...

    See also:

    Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    Emergency Fastening Device (EFD) Repair procedures
    Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the front seat. (Refer to Body - "Front Seat Assembly") 3. Remove the rea ...

    Preparation Of Tools And Measuring Equipment
    Be sure that all necessary tools and measuring equipment are available starting work. Special Tools Use special tools when they are required. Removal Of Parts First find th ...