Hyundai Sonata: Hood Latch Release Handle Components and Components Location - Hood - Body (Interior and Exterior)Hyundai Sonata: Hood Latch Release Handle Components and Components Location

Component Location

1. Hood latch release handle


    Hood Insulator Pad Repair procedures
    Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Install in the rev ...

    Hood Latch Release Handle Repair procedures
    Replacement 1. Using a socket (B), remove the hood release handle (A). 2. Install in the reverse order of removal.     • Make sure the hood latch cable is connected pro ...

    See also:

    Camshaft Position Sensor (CMPS) Schematic Diagrams
    Circuit Diagram ...

    Condenser Repair procedures
    Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. ...

    Owner maintenance
    The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation ...