Hyundai Sonata: Hood Lift Repair procedures - Hood - Body (Interior and Exterior)Hyundai Sonata: Hood Lift Repair procedures

Replacement
   
When removing and installing the hood lift, an assistant is necessary.
When removing the hood lift, first remove the lower portion and then upper portion.
1.
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lift (B), and then remove the lift from the bracket.

2.
Push the socket of the lift into the bracket for installation.
   
Make sure the hood locks / unlocks and opens / closes properly.
    Hood Assembly Repair procedures
    Replacement     • Be careful not to damage the hood and body.     • When removing and installing the hood, an assistant is necessary. 1. Aft ...

    Hood Insulator Pad Repair procedures
    Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Install in the rev ...

    See also:

    Brake Pedal. Components and Components Location
    Components 1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Return spring 5. Brake pedal stopper 6. Clevis pin 7. Snap pin 8. Brak ...

    Auto Head Lamp Leveling Unit Description and Operation
    Description According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from ...

    ESC OFF Switch. Repair procedures
    Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. ...