Hyundai Sonata: Idler Repair procedures - Timing System - Engine Mechanical SystemHyundai Sonata: Idler Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the idler (A).

Tightening torque :
42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
    Drive Belt Tensioner Components and Components Location
    Components 1. Drive belt tensioner ...

    See also:

    Components and Components Location
    Components 1. ESC Control Module (HECU) 2. Front Wheel Speed Sensor 3. Rear Wheel Speed Sensor 4. Steering Wheel Angle Sensor 5. Yaw-late & Lateral G SEnsor ...

    Fan speed control
    The fan speed can be set to the desired speed by pushing the fan speed control button. To change the fan speed, press the right of the button () for higher speed, or press the left of the butto ...

    Closing the hood
    1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...