Hyundai Sonata: Ignition Coil Repair procedures - Ignition System - Engine Electrical SystemHyundai Sonata: Ignition Coil Repair procedures

Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).

4.
Remove the ignition coil (A).

   
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Installation
1.
Install in the reverse order of removal.

Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)

Inspection
1.
Measure the primary coil resistance between terminals 1 and 2.


Standard value: 0.56? ± 10%

    Ignition Coil Schematic Diagrams
    Circuit Diagram ...

    Spark Plug Description and Operation
    Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture there ...

    See also:

    Rear Back Armrest Repair procedures
    Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

    Components and Components Location
    Components 1. Sub frame 2. Coil spring 3. Upper arm 4. Assist arm 5. Trailing arm 6. Rear axle ...

    Specifications
    Specifications Item Specification Master cylinder Type Tandem Cylinder I.D. 22.22mm Pisto ...