Hyundai Sonata: Inhibitor Switch Description and Operation - Dual Clutch Transmission Control System - DCT (Dual Clutch Transmission) SystemHyundai Sonata: Inhibitor Switch Description and Operation

Description
Components location : DCT (Dual Clutch Transmission)

Function
- The inhibitor switch mounted on the upper of transaxle and connected with shifter lever.
- The inhibitor switch has four points of contact and it makes the signals(S1, S2, S3, S4).
- The inhibitor switch signals delivered at the TCM according to control of the shift lever positions(P, R, N, D) and it is used to control of the gear setting.
    Inhibitor Switch Components and Components Location
    Components 1. Inhibitor switch2. Manual control lever ...

    Inhibitor Switch Specifications
    Specifications ? Type: Combination of output signals from 4 terminals ? Specifications ItemSpecificationsOutput typeCombination of output signalsPower supply (V)12 Signal Code Table ...

    See also:

    Description and Operation
    Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and res ...

    Power Window Motor Schematic Diagrams
    Circuit Diagram ...

    Engine Room Under Cover Repair procedures
    Removal and Installation 1. Loosen the mounting clip and bolt and then remove the under cover (A). Tightening torque: 7.8 ~ 11.7N.m (0.8 ~1.2kgf.m, 5.7 ~ 8.6 lb-ft) 2. Install in the rev ...