Hyundai Sonata: Input shaft speed sensor 2 Description and Operation - Dual Clutch Transmission Control System - DCT (Dual Clutch Transmission) SystemHyundai Sonata: Input shaft speed sensor 2 Description and Operation

Description
Components location : DCT (Dual Clutch Transmission)

Function
The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, including feedback control, gear shift control and failure detection of other sensors.
    Input shaft speed sensor 2 Specifications
    Specification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8.4 ...

    See also:

    Cylinder Block Repair procedures
    Removal Engine removal is required for this procedure. (Refer to Engine and transaxle assembly removal in this group) 1. MT : Remove the flywheel. (Refet to Cylinder Block - "Flywheel") 2. ...

    Antenna Coil. Repair procedures
    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds after loosening the scr ...

    Vanity mirror lamp
    Pull the sunvisor downward and you can turn the vanity mirror lamp ON or OFF by pushing the button. • : To turn the lamp ON. : To turn the lamp OFF. CAUTION To prevent unnecessary cha ...