Hyundai Sonata: Intake Actuator Description and Operation - Blower - Heating, Ventilation and Air ConditioningHyundai Sonata: Intake Actuator Description and Operation

Description
The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
    Intake Actuator Components and Components Location
    Components Location 1. Intake actuator ...

    Intake Actuator Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...

    See also:

    Repair procedures
    Removal     • Put on gloves to protect your hands.     • Use seat covers to avoid damaging any surfaces. 1. Remove the roof side molding. ...

    AVN Remote Controller (Sonata Sports) Components and Components Location
    Components 1. Left remote control switch (Audio + Hands free)2. Right remote control switch (Cruise+Trip Computer)3. Paddle shift switch (Down)4. Paddle shift switch (Up) ...

    Rear Wheel Speed Sensor Components and Components Location
    Components 1. Rear wheel speed sensor2. Rear wheel speed sensor cable ...