Hyundai Sonata: Interior Body Repair - Body Dimensions - Body (Interior and Exterior)Hyundai Sonata: Interior Body Repair

Interior A

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Interior B

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Interior C

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Interior D

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Interior E

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Interior F

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Front pillar upper extension tooling hole (O7)
Curtain airbag mounting hole (O6.6)

Curtain airbag mounting hole (O6.6)

Cowl crossbar mounting hole (O9)

Cowl side trim mounting hole (O8.4)

Front door checker mounting hole (O13)

Curtain airbag mounting hole (O6.6)
Seat belt height adjuster upper mounting hole (O16)
Seat belt pretensioner mounting hole (O14)

Rear door checker mounting hole (O13)
Curtain airbag mounting hole (O6.6)

Rear pillar trim mounting hole (O6.6)

Rear door striker mounting hole (O13)

Quarter inner lower panel tooling hole (O16)
Quarter inner panel tooling hole (O6.6)

Quarter inner panel tooling hole (O7)
Quarter inner panel tooling hole (O7)

Center floor panel tooling hole (O9)

Side sill inner reinforcement tooling hole (O7)
Front step tooling hole (O10)

Front seat mounting hole (O13)

Front seat mounting hole (O11)

Front seat mounting hole (O11)
Front seat mounting hole (O11)

Center side sill corner

Rear floor panel tooling hole (O15)
Rear seat mounting hole (O18)

Quarter inner panel tooling hole (O6.6)

Quarter inner lower panel tooling hole (O5.5)
Rear floor extension tooling hole (O8)

Rear floor extension tooling hole (O8)

Rear floor panel mounting hole (O14)
Rear floor panel mounting hole (O14)

Rear floor panel mounting hole (O13)

Rear transverse trim mounting hole (O8.4)



    Side Body Body Repair
    Side Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side Body B * These dimensions indicated in this figure are actual-measuremen ...

    Rear Body Body Repair
    * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer panel rear cornerSide outer panel rear cornerSide outer panel rear cornerRear co ...

    See also:

    Thermostat. Repair procedures
    Removal and Installation Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. ...

    Repair procedures
    Repair procedures ESP System bleeding This procedure should be followed to ensure adequate bleeding of air and filling of the ESC unit, brake lines and master cylinder with brake fluid. 1. ...

    Rear Oil Seal Repair procedures
    Removal 1. Remove the transaxle assembly. (Refer to transaxle - "Manual Transaxle assembly, Auto Transaxle assembly") 2. MT : Remove the flywheel. (Refet to Cylinder Block - "Flywheel") 3 ...