Hyundai Sonata: Lane Departure Warning System (LDWS) Unit Repair procedures - Lane Departure Warning System (LDWS) - Body Electrical SystemHyundai Sonata: Lane Departure Warning System (LDWS) Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the LDWS unit cover (A).

3.
Disconnect the LDWS unit connector (A).

4.
Remove the LDWS unit after disengaging the mounting bracket (A).

Installation
1.
Align LDWS unit with windshield bracket using forward edge point (A).

2.
Engage snaps and pivot upward to lock point (B).

   
LDWS unit is fully assembled when a single click sound is hear.
3.
Connect the LDWS unit connector.
4.
Connect the negative (-) battery terminal.
    See also:

    Rear Oil Seal Components and Components Location
    Components 1. Rear oil seal ...

    Temperature Control Actuator Description and Operation
    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the ...

    Rear Combination Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the nuts (4EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination ...