Hyundai Sonata: License Lamps Repair procedures - Lighting System - Body Electrical SystemHyundai Sonata: License Lamps Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk lid panel.
(Refer to Body - "Trunk Lid Trim")
3.
Remove the license lamp after disengaging the license lamp mounting clip (A).

4.
Remove the license lamp assembly after disconnect the license connector (A).

Installation
1.
Install the license lamp assembly.
2.
Install the trunk lid panel.
3.
Connect the negative (-) battery terminal.
    Front Fog Lamps Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector (A). 4. Remove t ...

    High Mounted Stop Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear package tray trim. (Refer to Body - "Rear Package Tray Trim") 3. Remove the high mounted stop lamp after diseng ...

    See also:

    Cup holder
    WARNING - Hot liquids Do not place uncovered cups of hot liquid in the cup holder while the vehicle is in motion. If the hot liquid spills, you may burn yourself. Such a burn to the driver c ...

    Overhead Console Lamp. Schematic Diagrams
    Circuit Diagram ...

    Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...