Hyundai Sonata: Memory power seat switch Repair procedures - IMS(Integrated Memory System) - Body Electrical SystemHyundai Sonata: Memory power seat switch Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door trim.
(Refer to Body - "Front Door Trim")
3.
Remove the memory power seat switch connector (A).

4.
Remove the memory power seat switch (A) after loosening the mounting screws.

Installation
1.
Install the memory power seat control switch (IMS).
2.
Install the door trim.
3.
Connect the negative (-) battery terminal.
Inspection
1.
Remove the memory power seat connector

2.
When each switch is pressed, check the electricity flow between memory power seat switch connector and grounding, and if the electricity does not match the specification, replace the switch.

    See also:

    Starter. Components and Components Location
    Components [REMY] 1. Front bracket 2. Stop ring 3. Stopper 4. Overrun clutch assembly 5. Internal gear assembly 6. Lever 7. Lever packing 8. Magnet s ...

    Room Lamp. Repair procedures
    Inspection Room Lamp 1. Check that the switch operates properly after disconnecting the room lamp connector (A). Removal Room L ...

    Repair procedures
    Refrigerant System Service Basics Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from th ...