Hyundai Sonata: Oil Level Gauge & Pipe Repair procedures - Lubrication System - Engine Mechanical SystemHyundai Sonata: Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.
Remove the oil lever gauge (A).

Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

2.
Install in the reverse order of removal.
    Oil Pan Repair procedures
    Removal 1. Remove the under covers. 2. Drain engine oil. 3. Using the SST (09215-3C000) and remove the oil pan.     • Insert the SST between the oil pan and the lad ...

    Oil Cooler Repair procedures
    Removal 1. Loosen the drain plug and drain the coolant. Open the radiator cap to make rapid draining. (Refer to Cooling System - "Coolant") 2. Disconnect the oil cooler hose (A). 3. Remo ...

    See also:

    Advanced Smart Cruise Control (ASCC) Unit-Radar Repair procedures
    Removal 1. Remove the bumper. (Refer to Body - "Front Bumper") 2. Disconnect the smart cruise control unit connector. 3. Remove the smart cruise control unit assembly (A) from vehic ...

    Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
    Circuit Diagram ...

    Rear Door Outside Handle Components and Components Location
    Component Location 1. Rear door outside handle ...