Hyundai Sonata: Outside Rear View Mirror Repair procedures - Mirror - Body (Interior and Exterior)Hyundai Sonata: Outside Rear View Mirror Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting clips, then remove the front door quadrant inner cover (A).

2.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
3.
Disconnect the outside rear view mirror connector (A).
4.
After loosening the mounting nuts, then remove the outside rear view mirror (B).

Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

5.
Install in the reverse order of removal.
   
Make sure the connector is connected properly.
Replace any damaged clips.
    Outside Rear View Mirror Components and Components Location
    Component Location 1. Outside rear view mirror ...

    Inside Rear View Mirror Components and Components Location
    Component Location 1. Inside rear view mirror ...

    See also:

    RCV Control Solenoid Valve Specifications
    Specification ItemSpecificationCoil Resistance(?)28.3 ~ 31.1 [20°C(68°F)] ...

    Illuminated ignition switch
    Whenever a front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when th ...

    Canister Close Valve (CCV). Schematic Diagrams
    Circuit Diagram ...