Hyundai Sonata: Power Seat Motor Repair procedures - Seat Electrical - Body Electrical SystemHyundai Sonata: Power Seat Motor Repair procedures

Inspection
Diagnosis with GDS
1.
The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following information.
(1)
Self diagnosis : Checking the failure code (DTC) and display
(2)
Current data : Checking the system input/output data state
(3)
Actuator test : Checking the system operation condition
(4)
Additional function : Other controlling such as he system option and zero point adjustment
2.
Select the "Car Model" and the system to be checked in order to check the vehicle with the tester.
3.
Select the "Power Seat Module (PSM)" to check the power seat module (PSM).
4.
Select the "Current Data" menu to search the current state of the input/output data.
The input/output data for the sensors corresponding to the power seat module (PSM) can be checked.
5.
If you will check the power door lock operation forcefully, select "Actuation test".
Power Seat Motor
1.
Disconnect the connectors for each motor.
[Slide Motor]

[Rear Height Motor]

[Front Height Motor]

[Reclining Motor]

[Lumbar Support Motor]

2.
With the battery connected directly to the motor terminals, check if the motors run smoothly.
3.
Reverse the connections and check that the motor turns in reverse.
4.
If there is an abnormality, replace the motors.
[Driver / Assist]

Reclining Motor Limit Switch
   
The power seat motor(IMS specification) mounted in this vehicle uses the hole sensor to calculate the maximum operation distance, so it does not require limit switch.
But, NON- IMS specification driver seat and passenger seat have limit switches in the motor in the back of the chairs.
1.
Disconnect the limit switch and operate the limit switch.
2.
Check for continuity between the terminals.
3.
Make sure that the seat operation is normal in the reverse after the maximum operation.
4.
If there is an abnormality, replace the limit switch.

Remove
Front Seat
1.
Disconnect the battery terminals.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
    Power Seat Motor Components and Components Location
    Component Location 1. Slide motor2. Front height motor3. Air ventilation seat blower4. Reclining motor5. Lumbar support motor (Vertical)6. Lumbar support motor (Horizontal)7. Rear height motor8. ...

    See also:

    Rear Hub - Carrier Components and Components Location
    Components [EPB Type] 1. Rear carrier assembly2. Dust cover3. Rear hub assembly4. Rear disc brake [General Type] 1. Parking brake assembly2. Rear hub assembly3. Rear disc brake ...

    Special Service Tools
    Special Service Tools Tool (Number and Name) Illustration Application RKE Battery Checker (09954-2P100) Measuring t ...

    Side Impact Sensor (SIS). Repair procedures
    Removal Pressure Side Impact Sensor • Removal of the airbag must be performed accordin ...