Hyundai Sonata: Rear Body Body Repair - Body Dimensions - Body (Interior and Exterior)Hyundai Sonata: Rear Body Body Repair

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Side outer panel rear corner

Side outer panel rear corner

Side outer panel rear corner

Rear combination lamp mounting hole (O6)
Rear bumper mounting hole (8.5X8.5)
Rear bumper mounting hole (11X13)

Rear bumper mounting hole (11X13)
Rear seat belt retractor mounting hole (O15)
Rear seat belt retractor mounting hole (O15)



Trunk lid hinge mounting hole (O9)




    Interior Body Repair
    Interior A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Interior B * These dimensions indicated in this figure are actual-measurement ...

    Under Body Body Repair
    Projected Dimensions * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Actual Measurement Dimensions * These dimensions indicated in this f ...

    See also:

    Injector Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within t ...

    Repair procedures
    Removal • Use fender covers to avoid damaging painted surfaces. ...

    Brake fluid
    Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the ...