Hyundai Sonata: Rear Bumper Beam Assembly Components and Components Location - Rear Bumper - Body (Interior and Exterior)Hyundai Sonata: Rear Bumper Beam Assembly Components and Components Location

Component Location

1. Rear bumper beam assembly


    Rear Bumper Cover Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with ...

    Rear Bumper Beam Assembly Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

    See also:

    Repair procedures
    Inspection     • Wrap the protective tape on the tool to disassemble with the screwdriver or remover. • Use caution in keeping and handling during disassembling/asse ...

    Starter Specifications
    Specification ItemSpecificationRated voltage12 V, 0.9 kWThe number of pinion teeth10Performance[No-load, 11.5 V]AmpereMax. 60 ASpeedMin. 5,500 rpm ...

    Compressor Description and Operation
    Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low tempera ...