Hyundai Sonata: Rear Combination Lamp Repair procedures - Lighting System - Body Electrical SystemHyundai Sonata: Rear Combination Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loose the nuts (4EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp assembly.

3.
Remove the bulb (A) after turnicng in the counter clock-wise direction.

4.
Remove the inside rear combination lamp assembly (A) after loosening the nuts (3EA) and disconnecting the connector (B).

5.
If it is necessary to replace the bulb, remove the bulb after removing the trunk lid trim.
6.
Remove the bulb (A) after separating the inside rear combination lamp assembly.

Installation
1.
Install the inside combination lamp assembly after assembling the bulb.
2.
Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.
    High Mounted Stop Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear package tray trim. (Refer to Body - "Rear Package Tray Trim") 3. Remove the high mounted stop lamp after diseng ...

    See also:

    Rear Bumper. Components and Components Location
    Components 1. Rear bumper cover 2. Energy up sober 3. Rear bumper side bracket ...

    Warning And Caution Labels
    General Information 1. Radiator cap caution2. Fan caution3. Battery caution Attention SRS VehicleThis car is equipped with a supplemental restraint system. To provide continedreliablity, ...

    Passenger Airbag (PAB) Module Description and Operation
    Description Passenger Airbag (PAB) module is located in the passenger crash pad. This PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending of crash speed or the t ...