Hyundai Sonata: Rear Door Outside Handle Repair procedures - Rear Door - Body (Interior and Exterior)Hyundai Sonata: Rear Door Outside Handle Repair procedures

Replacement
1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the rear door outside handle cover (A).

Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Remove the rear door outside handle (A) by sliding it rearward.

4.
Install in the reverse order of removal.
   
Be sure to install the outside handle pad (A) onto between the outside handle and the door panel.

Make sure the connector is connected properly.
Make sure the door locks / unlocks and opens / closes properly.
    Rear Door Outside Handle Components and Components Location
    Component Location 1. Rear door outside handle ...

    Rear Door Belt Outside Weatherstrip Repair procedures
    Replacememt 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A). 3. Install in the reverse order of removal ...

    See also:

    AVN Antenna Repair procedures
    Inspection Glass Antenna Test 1. Wrap aluminum foil (A) around the tip of the tester probe (B) as shown. 2. Touch one tester probe to the glass antenna terminal (A) and move the other teste ...

    Smart key. Repair procedures
    Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. ...

    Roof Side Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...