Hyundai Sonata: Rear Mud Guard Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Sonata: Rear Mud Guard Repair procedures

Replacement
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting screw, then remove the rear mud guard (A) by using a screw driver.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Front Mud Guard Repair procedures
    Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

    Side Sill Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    See also:

    Rear Hub - Carrier. Components and Components Location
    Components 1. Rear Carrier Assembly 2. Parking Brake Assembly 3. Rear Hub Assembly 4. Rear Brake Disc ...

    Cooling Fan Schematic Diagrams
    Circuit Diagram ...

    Canister. Repair procedures
    Removal 1. Disconnect the canister close valve connector (A). 2. Disconnect the ventilation tube quick-connector (B) and the vapor tube qu ...