Hyundai Sonata: Rear Pillar Trim Repair procedures - Interior Trim - Body (Interior and Exterior)Hyundai Sonata: Rear Pillar Trim Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Slighty remove the rear door body side weatherstrip.
2.
Using a screwdriver or remover, remove the rear pillar tirm (A).
   
If trying to remove rear pillar trim forcibly, body panel and rear pillar trim might get damaged.

3.
Install in the reverse order of removal.
   
Replace any damage clips.
    Rear Pillar Trim Components and Components Location
    Component Location 1. Rear pillar trim ...

    Rear Package Tray Trim Components and Components Location
    Component Location 1. Rear package tray trim ...

    See also:

    Starter Description and Operation
    Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

    Boost Pressure Sensor (BPS) Specifications
    Specification Pressure[kPa (kg/cm? / psi)]Resistance (k?)32.5 (0.33, 4.71)0.5284 (2.90, 41.19)4.5 ...

    Front Oil Seal Repair procedures
    Removal and Installation 1. Crankshaft damper pulley. (Refer to Timing System - "Damper Pulley") 2. Remove the front oil seal.     Using the SST (09455-21200), reassemble t ...