Hyundai Sonata: Rear Seat Assembly Repair procedures - Rear Seat - Body (Interior and Exterior)Hyundai Sonata: Rear Seat Assembly Repair procedures

Replacement
[Rear seat cushion assembly]
1.
Remove the rear seat cushion assembly (A).

   
?Rear seat cushion separation method
1.
Remove the rear seat cushion by pulling upward.
2.
Remove the rear seat cushion by pulling upwards while pushing rearward.
2.
Disconnect the heater cushion connector (A).
[LH]

[RH]

3.
Install in the reverse order of removal.
   
•
Make sure the connector is connected properly.
[Rear seat back assembly]
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
After loosening the mounting bolts, then remove the side back cover (A).

3.
After loosening the mounting bolts, then remove the rear seat belt buckle [RH] (A).

4.
Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.

5.
After loosening the mounting bolts, then remove the rear seat back assembly (A).

6.
Install in the reverse order of removal.
    Rear Seat Assembly Components and Components Location
    Component Location 1. Rear seat cushion assembly2. Rear seat back assembly ...

    Rear Seat Back Cover Components and Components Location
    Component Location 1. Rear seat back cover [LH]2. Rear seat back cover [RH] ...

    See also:

    Rear view camera
    WARNING This system is a supplementary function only. It is the responsibility of the driver to always check the inside/outside rearview mirror and the area behind the vehicle before ...

    Canister Close Valve (CCV). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the ...

    Auto Head Lamp Leveling Unit Troubleshooting
    Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. NoProcedure1Locate vehicle to flat plane2Tire check3IG ...