Hyundai Sonata: Rear Seat Belt Buckle Repair procedures - Rear Seat Belt - Body (Interior and Exterior)Hyundai Sonata: Rear Seat Belt Buckle Repair procedures

Replacement
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

[RH]

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
    Rear Seat Belt Buckle Components and Components Location
    Component Location 1. Rear seat belt buckle [RH]2. Rear seat belt buckle [LH] ...

    See also:

    Trip Switch. Schematic Diagrams
    Circuit Diagram ...

    Special Service Tools
    Special Service Tools Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09214-3K000) (09231-H1100) ...

    Road warning
    Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used when ...