Hyundai Sonata: Repair procedures - Crankcase Emission Control System - Emission Control SystemHyundai Sonata: Repair procedures

Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Inspect the PCV vlave operation.
(1)
Run the engine at idle.
(2)
Put a finger on the open end of the PCV valve.
(3)
Make sure that intake manifold vaccum can be felt.
   
The plunger inside the PCV valve will move back and forth at vacuum.

4.
If the vacuum is not felt, clean or replace the vapor hose.
    Schematic Diagrams
    Schematic Diagram ...

    See also:

    Hood Latch Components and Components Location
    Component Location 1. Hood latch assembly ...

    Front Wiper Motor. Components and Components Location
    Component Location 1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...

    Smart Key Unit Repair procedures
    Removal Smart Key Unit 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Upper Cover Assembly") 3. Remove the smart key unit (B) after ...