Hyundai Sonata: Repair procedures - Cowl Top Cover - Body (Interior and Exterior)Hyundai Sonata: Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :
22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.
Disconnect the nozzle hose (A).
3.
Detach the clips, then remove the cowl top cover (B).

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Components and Components Location
    Component Location 1. Cowl top cover ...

    See also:

    Repair procedures
    On-vehicle Inpection     • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) ...

    Delivery Pipe Repair procedures
    Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure f ...

    MTS Antenna. Components and Components Location
    Components ...